Industrial Bridge Type Drying Oven for Painting Line
|FOB Price:||US $10,000-100,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $10,000-100,000/ Piece|
|Transport Package:||Export Container /Pallet /Disassembly with Carton|
|Payment Terms:||L/C, T/T|
- Model NO.: Spray
- Heating Mode: Transmission
- Operation Pressure: Atmospheric Dryer
- Drying Oven: Bridge
- Heating Method: Gas
- Structure: Air Flow Drier
- Type of Flow: Contra-Flow
- Sprayer: Air-Flowing Type
- Specification: CE ISO SGS
- HS Code: 89248999
- Movement Way: Combined
- Drying Medium: Air
- Operational Method: Continuous
- Oversea Services: Supply
- Painting Method: Auto
- Appearance of Dried Sample: Bulk
- Type of Atomization: Gas Atomization
- Trademark: SPRAY
- Origin: Jiangsu Yangzhou
1.Have installation record at overseas,such as Spain,Sharjah United Arab Emirates,Iran,Australia,Mexic and etc.
2.Cooperate with Haier,ASAIC,Hisense,Liugong,ABB,WNM,Midea and other famous company.
3.CE ISO 14000 certificated
4..Can be customized as customer's requests
5.Supply installation overseas
6.Professional team supply professional service from designing drawing ,technical proposal,quotation,installation,Commissioning, maintenance and after-sales service.
2.The parameter for drying oven
|1||Type||Hot air circulation one-stroke bridge type drying oven|
|2||Thickiness of insulation layer||100mm|
|3||Air movement air supply||Up-supply,Down-return supply|
|4||Type of exits and entrances||Bridge type|
|5||Heating source||Natural gas|
|6||Temperature in oven||120°C-160°C(Adjustable )|
|7||Time of heating up||40min when the room temperature is 15°C rising to the setting temperature|
|8||Time of drying||10min|
|9||Effective heating length of oven||20m|
|10||Air cycle times||2-3pc/min|
|11||Temperature difference of effective drying zone||<±5ºC|
|12||Surface temperature for outer wall||Higher than ambient temperature <10°C|
|1||Chamber oven||Ineer plate in oven||Cold plate δ|
0.8 corrugated plate
|Outer plate||Galvanized sheet|
|Otter plate||Hot plateδ1.5punching|
|Insulation layer||Rock wool 100kg/m3 100mm|
|Outsourcing angle||Hot plate δ2.0 surface painting|
|Inner wrapping angle||Galvanized sheet δ1.2|
|2||Air supply duct||Galvanized sheet δ1.0|
|3||Air exhaust duct||Galvanized sheet δ1.0|
|4||Chamber of Heating oven||Ineer plate|
|Side outer lpate|
|Top outer plate|
|Otter plate||Hot plateδ2.5|
|Outsourcing angle||Hot plateδ 2.5|
|Inner wrapping angle||Galvanized sheet δ1.2|
|5||Heating device||Gas||Gas burner|
|6||Stand||Column||10# Square pipe|
|1||Hot air circulation fan||Insert type high temperature resistant fan|
|2||Heating system||Riello gas burning machine|
4.We sepcialized in the whole painting line
2,Moisture drying oven
3,Suspension conveying device
4,Powder soraying booth
5,Powder curing oven
6.Electrical control device
*Drying oven: including drying channel, heating system, hot air circulation system and exhaust system, etc .Drying oven is used for drying the water after pre-treatment ,is designed following customer requests. Electricity, gas, diesel are all available for the heating energy;
|*Powder coating spray system: Automatic spray reciprocator , Manual spray equipment and Semi-auto (Auto-spraying with manual repairing spraying)|
|*Powder recycling system: Cyclone equipment and cartridge filters is customized and introduced according to actual requirement by customer;|
|*Curing oven: Tunnel curing oven, bridge type curing oven, Electric power heating curing oven, Gas-heating curing oven, Diesel heating curing oven, High-temperature and lower-temperature curing ovens are available for fitting your sole factory;|
|*Conveying system: Various design according to different requirement by customer on the basis of customers' workpiece and output information, including plate conveyor, chain conveyor, overhead conveyor etc.;|
Provide considerate services to minimize client's worries
1). Assist clients to prepare for the first construction scheme.
2). Install and debug the equipment.
3). Train the first-line operators.
4). Examine the equipment.
5). Take initiative to eliminate the trouble rapidly.
6). Provide perfect service.
7). Provide technical exchanging.
7.If you want to custom made any powder coating line, pls tell us the following specifications:
1. Workpieces Max weight and Max size (length ,width and high) and picture.
2. If have any requirements about the suspension of the workpiece
3. The material of the workpiece
4. The anticipative output for the biggest size of the workpiece(how many pcs in 8 hours)
5. The length, width and height of the factory available for the coating line
6. The heating power: Liquefied Petroleum Gas, Liquefied natural gas, Diesel, Electric, Coal or Biomass particles.
7. If need to change colors in one day? How many colors do you have?
8. Need automatic paint or manual paint
9. If need pretreatment process? If need, want spray pretreatment, bath pretreatment or shot/sand blasting ?
10. The local electricity conditions(V/PHASE/HZ)